Air Cooled 31CC Petrol Brush Cutter 1HP Gasoline Grass Cutter

7.5KG Air-cooled Single Cylinder 4 Stroke 31CC 1HP Gasoline Grass Cutter

Description

Our gasoline brush cutter has good durability and can be used as a professional commercial mowing. Compared with ordinary brush cutters, it is very easy to start, easy to operate, and has a wide range of applications. This gasoline brush cutter can be equipped with various knives.

Technical maintenance

1 The run-in period for the newly delivered gasoline brush cutter is from the beginning of use until the third oil filling. Do not let the engine run at high speed without load during use, so as not to bring additional burden to the engine during the run-in period.

2 After working at full load for a long time during the working period, let the engine idle for a short time to allow the cooling airflow to take away most of the heat, so that the driving device components (ignition device, carburetor) will not cause adverse consequences due to heat accumulation.

3 The maintenance of the air filter. Adjust the air door to the choke position to prevent dirt from entering the intake pipe. Place the foam filter in a clean non-flammable cleaning fluid (such as hot soapy water) to wash and dry. Replace the felt filter. When it is not too dirty, you can tap or blow it slightly, but the felt filter cannot be cleaned. The damaged filter element must be replaced.

4 The inspection of spark plug. In case of insufficient engine power, difficulty in starting or idling failure, first check the spark plug. Clean the contaminated spark plug, check the electrode distance, the correct distance is 0.3mm, adjust if necessary. In order to avoid sparks and fire hazards, be sure to screw the nut onto the thread and tighten it, and press the spark plug tightly on the spark plug.

Specification

Advantage

1. Comfortable handle and powerful engine

2. Thicken the aluminum alloy operating lever

3. Enhanced version fixed seat

4. Thicken the working head of new material

5. Light and versatile